Massachusetts Institute of Technology
Sign in

Videos (6304)

Machine Shop 1

Prototype Machining

Added 8 years ago | 00:40:32 | 366247 views

Machining Skills for Prototype Development:1) Basic2) Layout Techniques3) Basic Tools: Drill Press, Band Saw, Belt Sander & Grinder4) Locating and Drilling Holes5) Tapping Holesduration 40:32

Indoor Autonomous Helicopter

Indoor Autonomous Helicopter

garrett hemann

Added over 6 years ago | 00:03:00 | 333986 views |

This is the complete platform for indoor autonomous flight, developed under Nick Roy in the Robust Robotics Group at CSAIL.

Vladimir Bulovic on OLED Displays

MIT Alumni Association

Added almost 7 years ago | 00:03:08 | 297990 views |

What does a glowing pickle have in common with sophisticated flat panel OLED video displays? Professor Vladimir Bulovic explains.

MIT Physics Demo -- Bicycle Wheel G...

MIT Department of Physics Technical Services Group

Added over 7 years ago | 00:01:28 | 175674 views

A bicycle wheel is suspended from one of end of its axie by a rope, and spun up by hand. The wheel's axle is then placed horizontally and the free end of the axle processes about the supported end. The gyroscope seems to defy gravity ...

Engineering Outreach Programs

eng-youth

Added almost 9 years ago | 00:03:37 | 141984 views

MIT's School of Engineering outreach programs: MITES, STEM, and SEED.

Machine Shop 4

Prototype Machining

Added 8 years ago | 00:50:32 | 134792 views

Duration 50:33Machine Shop 4 Milling Machine 1 1 Milling Machine 1 Layout & Use; what the different parts do 2 Quill Feed Allows you to move tool up and down 3 Axis Handfeed Feed/Crank on Axis with Dials to adjust the Bed 4 Gibb Loc...

Staying healthy during holiday travel

Staying healthy during holiday travel

MIT Medical

Added over 6 years ago | 00:03:53 | 126458 views |

Dr. Howard M. Heller, MD, MPH, Chief of Medicine at MIT Medical, talks about how to stay safe while traveling, especially on airplanes. He speaks about common "myths" about airplane travel, and demonstrates safe and unsafe ways to eat on...

Machine Shop 10

Prototype Machining

Added 8 years ago | 00:34:31 | 123779 views

Duration 34:32Machine Shop 10 Lathe 31 Lathe Chuck2 Lathe Arbors 3 Turning Between Centers 4 Face Plate Irregular Shapes 5 Face Plate Thin Materials

Machine Shop 2

Prototype Machining

Added 8 years ago | 00:57:33 | 119351 views

Machining Skills for Prototype Development:1) Basic 22) Drilling Holes3) Special Drills for Plastics and Hard or Abrasive Materials4) Drill Press Limitations5) Bandsaw6) Suitable Speeds, Feeds and Materials7) Bandsaw Setup8) Using the D...

Machine Shop 5

Prototype Machining

Added 8 years ago | 01:03:33 | 107560 views

Duration 1:03:33Machine Shop 5 Milling Machine 2 1 Milling Machine 2 Square and Hex Collett Blocks-used to hold/clamp parts to machine features on 4 and 6 sides of a part, respectively 2 V Blocks Holding parts to machine features into p...

Machine Shop 9

Prototype Machining

Added 8 years ago | 00:47:02 | 107132 views

Duration 47:33Lathe 21 Tapping2 Boring3 Knurling4 Cutting Tapers with the Compound5 Turning Shafts Use of live center6 Single Point Thread Turning

Machine Shop 8

Prototype Machining

Added 8 years ago | 00:45:02 | 98412 views

Duration 45:02Machine Shop 8 Lathe 11 The Lathe Components @ Set-Up Axes and Feeds 2 Turning Tools 3 Turning and Facing 4 Cutting Off a Part

← Previous 1 3 4 5 6 7 8 9 525 526